Strutconfigurator
Sector · infrastructure, tunnels and rail

Infrastructure, tunnels and rail: cantilevers along the wall

In tunnels, shafts and along railways, cables for high voltage, lighting and signalling run long distances along walls. Moisture, traffic and maintenance windows drive the choices.

Short answer

In infrastructure, tunnels and rail, cables are carried on cantilever arms along the wall, with cable ladders or trays in hot-dip galvanised or stainless steel. Choose corrosion-resistant materials against moisture and de-icing salt, keep routes accessible for maintenance and check circuit integrity requirements with the manufacturer.

Infrastructure, tunnels and rail: cantilevers along the wall450400Wall channel 41×41wall anchorsCantilever arm 300with gusset baseViewSideScale1:15
infrastructure, tunnels and railOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

Which construction fits a tunnel or shaft?

Along tunnel walls and in shafts there is little space and no soffit to hang from. A wall channel with cantilever arms, or a christmas tree in a shaft, carries several routes above each other. The configurator works out the length and parts per arm.

Advice for infrastructure
RequirementAdvice
Moisture, de-icing saltHot-dip galvanised or stainless
High voltage and powerCable ladder on cantilever arms
Signalling and dataTray or basket on its own level
Maintenance in short windowsModular cantilevers, one bill of materials per position

What about fire?

Tunnels often require circuit integrity for cables serving lighting, ventilation and communication. That needs tested systems, with lower loads and specific anchors. Follow the applicable standards and the manufacturer's system tables. The configurator shows a warning when circuit integrity is required.

Which systems do you use in tunnels and shafts?

The configurator covers every system below. You combine them in one configuration, with one bill of materials.

  • Wall channel with cantilever arms of 300 to 1,000 mm, in hot-dip galvanised or stainless steel
  • Cable ladders for high voltage and power, trays for signalling and data
  • Christmas tree brackets in shafts, with arms on both sides
  • A bill of materials per position, so crews can work efficiently in short maintenance windows

Frequently asked questions

Which material for cables in a tunnel?

Hot-dip galvanised or stainless steel, depending on moisture, de-icing salt and the service life the client requires.

Can the configurator deliver cantilevers per position?

Yes, with a drawing and bill of materials per position, useful for work in short maintenance windows.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day