Strutconfigurator
For installers

Your supports in a few minutes, with a bill of materials

No more sketches, no more counting channel nuts. Build the trapeze, frame or containment in 3D, add the cables and get the bill of materials, cutting list and drawing as PDF. Free.

Short answer

With Strutconfigurator, installers and job preparers configure a trapeze bracket, H-frame, cantilever or containment with cables in 3D, free of charge. You get a bill of materials, cutting list and drawing as PDF. When you want to order, your enquiry goes to a supplier, who contacts you within one working day.

Your supports in a few minutes, with a bill of materials1,400600710Threaded rod M102 × per bracketCable ladder 500×1008 × 5G16Cable basket 400×60Cat6A × 48 · OM4 × 18Strut 41×41×2.5HDGViewFrontScale1:20
For installersOwn drawing
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews
Starting point

What does it give you?

Less drawing in the office, fewer mistakes on site.

01

Faster

A two-tier trapeze with containment and cables is done in a few minutes. The configurator counts every nut and washer.

02

A complete bill of materials

Channel, threaded rod, channel nuts, clamps, containment, fittings and cables to length, in one list.

03

Right on site

The cutting list is optimised on 6 m lengths and the drawing shows every dimension.

Getting started

How it works

No account needed to configure.

  1. Live in the demo

    Choose system and environment

    Trapeze, H-frame, cantilever, christmas tree, cut strut or containment. Then sector and environment.

    View the systems
  2. Live in the demo

    Configure in 3D

    Dimensions, tiers, containment and cables. You see the fill ratio and indicative load straight away.

    Trapeze bracket builder
  3. Live in the demo

    Download or send an enquiry

    PDF with bill of materials, cutting list and drawing, or an enquiry to a supplier.

    Free tools

What happens to your enquiry?

Your enquiry goes, with the configuration and bill of materials, to a supplier in our network, who contacts you within one working day. We do not promise a price in advance: the supplier quotes on your bill of materials. Loads in the configurator are indicative; the manufacturer confirms them at quotation.

  • No account needed to configure
  • PDF with bill of materials, cutting list and drawing
  • Enquiry with name, company and email
  • Reply from a supplier within one working day
FAQ

Frequently asked questions

Is the configurator free?

Yes, configuring and the PDF are free. You only pay for what you order from the supplier.

Which brands can I choose?

The public version is brand-independent and uses common sizes found across several manufacturers.

Can I order cables to length as well?

Yes. You choose the cables and lengths per run, with connectors and labels.

How quickly will I hear back?

A supplier contacts you within one working day.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day